We use cookies to offer the best possible user experience on our website. We also use third-party cookies, to deliver personalised advertisement messages. By using our website you agree, that cookies can be saved on your device. Further information on the cookies used and on how to disable them can be found here.
 
 
MAXIMA 900
  • Modular system with 122 models with 40, 80, 120, 160 cm modules.
  • Low environmental impact: reduced consumption and high efficiency.
  • Guaranteed quality and safety: IMQ and IMQ-GS certifications.
  • Maximum life with 3 years warranty.
 
BACK TO THE PRODUCT LIST>> 
Gas Fryers
All versions, both electric and gas, are equipped with mechanical or digital controls so that the temperature can be precisely adjusted.
The direct heat technology with high efficiency burners guarantees a very quick recovery time and the heat distribution over a large surface prevents oil from being damaged by excessive temperatures.
The tank’ s well-rounded edges and the large inclined basket rest allow the operator to maintain the maximum hygiene and be safe and comfortable while working.
Ask for more informations
INDIRECT GAS FRYER ON CABINET - SINGLE TANK 18 LT
Code 20560000 - Mod 9GL18MI
Work top and front panels of AISI 304 stainless steel.
Pressed tank with a large “cool” zone to collect food residuals. The unit is easy to clean as there are no pipes and the draining hole is a large 1” diameter.
The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining.
Two stainless steel burners installed out of the tank, controlled by a solenoid valve with a temperature control by means of a high precision electric thermostat. Safety thermostat with manual restart, pilot flame and safety system with thermocouple.
Spherical draining faucet positioned in the compartment controlled by a heat-proof handle and with steel collection tray. Electric ignition. Adjustable feet.
Continue Technical Sheet
INDIRECT GAS FRYER WITH CABINET - SINGLE TANK 18 LT (ELECTRONIC CONTROLS)
Code 20560200 - Mod 9GL18MIEL
Work top and front panels of AISI 304 stainless steel.
Pressed tank with a large “cool” zone to collect food residuals. The unit is easy to clean as there are no pipes and the draining hole is a large 1” diameter. The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining.
Two stainless steel burners installed out of the tank, controlled by a solenoid valve with a temperature control through an electronic gearcase with the following functions: temperature control from 0° C to 190° C, display of the set and operational temperatures, program of “melting” and maintaining the temperature at 100 ° C for the use of solid fat for frying, self-diagnostic for possible failures.
Safety thermostat with manual restart, pilot flame and safety system with thermocouple.
Spherical draining faucet positioned in the compartment controlled by a heat-proof handle and with steel collection tray. Electric ignition. Adjustable feet.
Continue Technical Sheet
INDIRECT GAS FRYER WITH CABINET 18+18 LT
Code 20580000 - Mod 9GL18+18MI
Work top and front panels of AISI 304 stainless steel.
Pressed tank with a large “cool” zone to collect food residuals. The unit is easy to clean as there are no pipes and the draining hole is a large 1” diameter.
The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining.
Two stainless steel burners installed out of the tank, controlled by a solenoid valve with a temperature control by means of a high precision electric thermostat. Safety thermostat with manual restart, pilot flame and safety system with thermocouple.
Spherical draining faucet positioned in the compartment controlled by a heat-proof handle and with steel collection tray. Electric ignition. Adjustable feet.
Continue Technical Sheet
INDIRECT GAS FRYER WITH CABINET 18+18 LT (ELECTRONIC CONTROLS)
Code 20580200 - Mod 9GL18+18MIEL
Work top and front panels of AISI 304 stainless steel.
Pressed tank with a large “cool” zone to collect food residuals. The unit is easy to clean as there are no pipes and the draining hole is a large 1” diameter. The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining.
Two stainless steel burners installed out of the tank, controlled by a solenoid valve with a temperature control through an electronic gearcase with the following functions: temperature control from 0° C to 190° C, display of the set and operational temperatures, program of “melting” and maintaining the temperature at 100 ° C for the use of solid fat for frying, self-diagnostic for possible failures.
Safety thermostat with manual restart, pilot flame and safety system with thermocouple.
Spherical draining faucet positioned in the compartment controlled by a heat-proof handle and with steel collection tray. Electric ignition. Adjustable feet.
Continue Technical Sheet
GAS FRYER ON CABINET 22 LT
Code 20470000 - Mod 9GL22M
Worktop, front and side panels made of AISI 304 stainless steel. Inside made of stainless steel.Stainless steel burners with an oval honey-comb section. Oval section large surface heat exchangers positioned directly in the tank to ensure fast and homogeneous heating. Pilot flame and thermocouple safety valve. Piezoelectric ignition with rubber protection. AISI 304 stainless steel tank with large rounded edges and wide cold zone below the burners to decant the residual. The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining. Temperature control through a thermostatic valve from 110° C to 190° C with a more precise temperature detection, thanks to the sensors positioned in the tank. Safety thermostat with manual restart. Spherical draining tap positioned in the compartment controlled by an athermic handle and with steel collection tray.
Continue Technical Sheet
GAS FRYER WITH CABINET - SINGLE TANK 22 LT (ELECTRONIC CONTROLS)
Code 20470100 - Mod 9GL22MEL
Worktop, front and side panels made of AISI 304 stainless steel.
Stainless steel burners with an oval honey-comb section. Oval section large surface heat exchangers positioned directly in the tank to ensure fast and homogeneous heating. AISI 304 stainless steel tank with large rounded edges and wide cold zone below the burners to decant the residual. The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining. Temperature control through an electronic gearcase with the following functions: temperature control from 0° C to 190° C, display of the set and operational temperatures, program of “melting” and maintaining the temperature at 100 ° C for the use of solid fat for frying, self-diagnostic for possible failures.
Safety thermostat with manual restart. Spherical draining tap positioned in the compartment controlled by an athermic handle.
Continue Technical Sheet
GAS FRYER ON CABINET 22+22 LT
Code 20490000 - Mod 9GL22+22M
Worktop, front and side panels made of AISI 304 stainless steel. Inside made of stainless steel.Stainless steel burners with an oval honey-comb section. Oval section large surface heat exchangers positioned directly in the tank to ensure fast and homogeneous heating. Pilot flame and thermocouple safety valve. Piezoelectric ignition with rubber protection. AISI 304 stainless steel tank with large rounded edges and wide cold zone below the burners to decant the residual. The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining. Temperature control through a thermostatic valve from 110° C to 190° C with a more precise temperature detection, thanks to the sensors positioned in the tank. Safety thermostat with manual restart. Spherical draining tap positioned in the compartment controlled by an athermic handle and with steel collection tray.
Continue Technical Sheet
GAS FRYER WITH CABINET - 22+22 LT (ELECTRONIC CONTROLS)
Code 20490100 - Mod 9GL22+22MEL
Worktop, front and side panels made of AISI 304 stainless steel.
Stainless steel burners with an oval honey-comb section. Oval section large surface heat exchangers positioned directly in the tank to ensure fast and homogeneous heating. AISI 304 stainless steel tank with large rounded edges and wide cold zone below the burners to decant the residual. The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining. Temperature control through an electronic gearcase with the following functions: temperature control from 0° C to 190° C, display of the set and operational temperatures, program of “melting” and maintaining the temperature at 100 ° C for the use of solid fat for frying, self-diagnostic for possible failures.
Safety thermostat with manual restart. Spherical draining tap positioned in the compartment controlled by an athermic handle.
Continue Technical Sheet
 

BERTO'S: EXCELLENT PROFESSIONAL COOKERS

40 years of passion, experience, research and development with a sole aim. Create the perfect cooker … yours!
PARTNERSHIPS
All of Berto's partners are the leaders in their specific fields
 
 
PROJECTS
Each Berto's Cooker is designed and processed with care down to the smallest details
 
 
CONTACT US
For information, advice or assistance
You are always welcome!
 
 
Work with Us
If you would like to join the Berto's world, send us your resume
 
 
 
Certifications
 
 
 
 
Newsletter
 
Stay informed about Berto's