We use cookies to offer the best possible user experience on our website. We also use third-party cookies, to deliver personalised advertisement messages. By using our website you agree, that cookies can be saved on your device. Further information on the cookies used and on how to disable them can be found here.
 
 
S 900
  • Modular system with 109 models with 40, 80, 120 cm modules.
  • Top quality materials: AISI 304 stainless steel, 20/10 thick tops, Scotch Brite finish.
  • Low environmental impact: reduced consumption and high efficiency.
  • Guaranteed quality and safety: IMQ and IMQ-GS certifications.
  • Maximum life with 5 years warranty.
 
BACK TO THE PRODUCT LIST>> 
GAS FRYERS
All versions, both electric and gas, are equipped with electronic controls so that the temperature can be precisely adjusted (up to 190° C).
The direct heat technology with high efficiency burners guarantees a very quick recovery time and the heat distribution over a large surface prevents oil from being damaged by excessive temperatures.
The pressed tank’s well-rounded edges (18 or 22 L capacity) and the large inclined surface allow the operator to maintain the maximum hygiene and be safe and comfortable while working.
The stainless steel Incoloy resistances positioned in the tank can be tilted to make cleaning easier.
VideoAsk for more informations
GAS FRYER WITH CABINET - SINGLE TANK 18 LT - INDIRECT
Code 13550000 - Mod S9GL18MI
Worktop in AISI 304 stainless steel with a 20/10 thickness, front and side panels in AISI 304 stainless steel and Scotch Brite finishing.
Pressed tank with a large “cool” zone to collect food residuals. The unit is easy to clean as there are no pipes and the draining hole is a large 1” diameter.
The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining.
Two stainless steel burners installed out of the tank, controlled by a solenoid valve with a temperature control by means of a high precision electric thermostat. Safety thermostat with manual restart, pilot flame and safety system with thermocouple.
Spherical draining faucet positioned in the compartment controlled by a heat-proof handle and with steel collection tray. Electric ignition. Adjustable feet.
Continue Technical Sheet
GAS FRYER WITH CABINET - TWIN TANK 18+18 LT - INDIRECT
Code 13550200 - Mod S9GL18+18MI
Worktop in AISI 304 stainless steel with a 20/10 thickness, front and side panels in AISI 304 stainless steel and Scotch Brite finishing.
Pressed tank with a large “cool” zone to collect food residuals. The unit is easy to clean as there are no pipes and the draining hole is a large 1” diameter.
The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining.
Two stainless steel burners installed out of the tank, controlled by a solenoid valve with a temperature control by means of a high precision electric thermostat. Safety thermostat with manual restart, pilot flame and safety system with thermocouple.
Spherical draining faucet positioned in the compartment controlled by a heat-proof handle and with steel collection tray. Electric ignition. Adjustable feet.
Continue Technical Sheet
GAS FRYER WITH CABINET - SINGLE TANK 20 LT
Code 13460000 - Mod S9GL20M
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel and Scotch Brite finishing. Stainless steel burners with an oval honey-comb section. Oval section large surface heat exchangers positioned directly in the tank to ensure fast and homogeneous heating. Pilot flame and thermocouple safety valve. AISI 304 stainless steel tank with large rounded edges and wide cold zone below the burners to decant the residual. The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining. Temperature control through a thermostatic valve from 110° C to 190° C with a more precise temperature detection, thanks to the sensors positioned in the tank. Safety thermostat with manual restart.
Spherical draining tap positioned in the compartment controlled by an athermic handle and with steel collection tray.
Continue Technical Sheet
GAS FRYER WITH CABINET - TWIN TANK 20+20 LT
Code 13480000 - Mod S9GL20+20M
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel and Scotch Brite finishing. Stainless steel burners with an oval honey-comb section. Oval section large surface heat exchangers positioned directly in the tank to ensure fast and homogeneous heating. Pilot flame and thermocouple safety valve. AISI 304 stainless steel tank with large rounded edges and wide cold zone below the burners to decant the residual. The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining. Temperature control through a thermostatic valve from 110° C to 190° C with a more precise temperature detection, thanks to the sensors positioned in the tank. Safety thermostat with manual restart.
Spherical draining tap positioned in the compartment controlled by an athermic handle and with steel collection tray.
Continue Technical Sheet
 

BERTO'S: EXCELLENT PROFESSIONAL COOKERS

45 years of passion, experience, research and development with a sole aim. Create the perfect cooker … yours!
PARTNERSHIPS
All of Berto's partners are the leaders in their specific fields
 
 
PROJECTS
Each Berto's Cooker is designed and processed with care down to the smallest details
 
 
CONTACT US
For information, advice or assistance
You are always welcome!
 
 
Work with Us
If you would like to join the Berto's world, send us your resume
 
 
 
Certifications
 
 
 
 
Newsletter
 
Stay informed about Berto's